CMI 400TPH Portable Counterflow Drum Plant
DESCRIPTION: Complete upgraded C.M.I. Portable Counterflow Drum Plant. Features of this plant include the following:
- Two (2) sets of Portable C.M.I. Model PAB-432 – Four (4) Bin 10’ x 13’ Cold Feed Systems with 30” wide feeders, 5 HP shaft mounted drives and a nominal 30” wide integral collecting conveyor with bi-folding head section are feeding in line. These cold feed systems are also equipped with self-storing folding support pads to grade, self-contained ramping bulkhead on the loading side and tandem axle portability. Each bin is lined with bolt-in UHMW liners.
- Smico® 4’ x 10’ Single Deck Virgin Aggregate Scalping Screen.
- One (1) C.M.I. Portable Self-Erect 30” x nominal 50’ long Virgin Scale Conveyor with receiving trough, belt scale and wind guards on a single axle suspension.
- CMI PTD-400: A 400 TPH rated Counterflow Drum. This unit is equipped with a 5 HP slinger feed conveyor, Cradle Chain driven with 150 HP motor and Heavy-Duty Dodge TXT-10 reducer. The burner is a Hauck Starjet 580 long nose combination fuel burner currently burning heavy fuel. Unit also includes a recycle entry collar, support stands to grade, and a triple axle suspension.
- CMI model RA-418 Portable Roto-Aire® Baghouse Factory rated up to 85,000 ACFM. Baghouse includes mounted fan with twin 125 HP drives, an integrally mounted inertial collector with heavy fines seperator, dual auger bottom feeds a cross auger for dust removal and triple axle suspension.
- Dust “Run-Around” System to include three (3) dust augers with drives and adjustable support stands. A Weigh Pod on load cells and a waste auger.
- One (1) C.M.I. Model OCT 2010 PS Portable Coiled AC Tank. This is a 30,000-gallon tank That is split into two (2) compartments, 10,000 gallon and a 20,000-gallon compartment. The tank features an on-board Hot Oil Heater, Calibration Tank, and pump metering system on a tandem axle suspension.
- One (1) CMI Model OCT-30P-00, 30,000-gallon Coiled AC tank with mounted loading/unloading pump on a tandem axle frame. Tank is agitator ready with two (2) ports in the top.
- One (1) nominal 20,000-gallon vertical fuel tank with 3 HP fuel pump and a loading/unloading pump.
- CMI model PRB-120C24 Single Bin Portable, all-in-one RAP System consisting of a 8’ x 14’ bin with 30” feeder, 7.5 HP AC drive, and mounted/removable grizzlies. Integral folding 24” wide x nominal 50’ long scale conveyor with gravity take-up and a 7.5 HP AC drive. Bin is equipped with an air cannon, features mounted bulkhead walls, a 25 HP breaker and single axle portability.
- One (1) C.M.I. Single Level Control House with C.M.I. Impulse II Controls and B&S Lite loadout controls.
- One (1) CMI model PEC-2U Motor Control Center with a 2,000-amp Allen Bradley energy center mounted on a single axle frame.
- One (1) CMI Self-Erect Silo. Unit features a 36” wide main drag slat conveyor factory rated @ 450 TPH, dual strand 4” pitch chain, a pneumatic reject system. The chain and slats and floor liners have recently been replaced with less than 20,000 tons through
Info Sheet: GTB-5478WS