CMI 400 TPH Portable Counterflow Drum Plant

GTB-5549

Make: CMI                                                                         Type: 400 TPH Portable Counterflow Drum Plant

DESCRIPTION:  Complete CMI Portable Counterflow Drum Plant. Features of this plant include the following:

• Seven (7) Bin Cold Feed System consists of one (1) set of Portable CMI Model PAB-432 – Four (4) Bin 10’ x 14’ Cold Feed System with 30” wide feeders, 5 HP shaft mounted drives and a nominal 30” wide integral collecting conveyor with bi-folding head section and one (1) set of Portable CMI Model PAB-320 – Three (3) Bin 8’ x 13’ Cold Feed System with 24” wide feeders, 5 HP shaft mounted drives and a nominal 30” wide integral collecting conveyor with bi-folding head section. These cold feed systems are also equipped with self-storing support pads to grade, self-contained ramping bulkhead on the loading side and tandem axle portability.
• Smico® 4’ x 10’ Single Deck Virgin Aggregate Scalping Screen feeds a skid mounted Twin Shaft Pugmill with two (2) 40 HP motors and a nominal 5,000-gallon additive tank with pump package.
• CMI model MFS-700, nominal 700 BBL Self-Erect Mineral Filler Silo includes weigh pod on load cells and discharge auger all mounted on a single axle frame.
• One (1) CMI model PC-3047 Portable Self-Erect 30” x nominal 47’ long Virgin Scale Conveyor with receiving trough, belt scale and wind guards on a single axle suspension.
• CMI PTD-400: A 400 TPH rated Counterflow Drum. This unit is equipped with a 5 HP slinger feed conveyor, Cradle Chain driven with 150 HP motor and Heavy-Duty Dodge TXT-10 reducer. The burner is a Hauck Starjet 580 long nose combination fuel burner currently burning #2 fuel.  Unit also includes a recycle entry collar, support stands to grade, and a triple axle suspension.
• CMI model RA-418 Portable Roto-Aire® Baghouse Factory rated up to 85,000 ACFM. Baghouse includes mounted fan with twin 125 HP drives, an integrally mounted inertial collector with dual auger bottom feeds a cross auger for dust removal and triple axle suspension.
• Dust “Run-Around” System to include two (2) dust augers with drives and adjustable support stands and a Weigh Pod on load cells with a waste auger.
• One (1) CMI Model CT 15/15 Portable Coiled AC Tank. This is a 30,000-gallon tank that is split into two (2) equal compartments. The tank features an on-board unloading pump and fuel pump on a tandem axle suspension.
• One (1) CMI Model CT-30P 30,000-gallon Coiled AC tank with mounted loading/unloading pump, pump metering skid and a CEI model 2400 A Hot Oil Heater on a tandem axle frame.
• Dakota Fabricating Single Bin Portable RAP System consisting of a 8’ x 14’ bin with 42” feeder, 25 HP AC drive, and mounted/adjustable grizzlies mounted on single axle portability.
• Portable Single Axle RAP Feed Conveyor, 30” wide x nominal 80’ long and 20 HP drive
• One (1) CMI Single Level Control House with CMI Impulse II Controls.
• One (1) CMI model PEC-2U Motor Control Center with a 2,000-amp Allen Bradley energy center mounted on a single axle frame.
• One (1) CMI model SE-195, Self-Erect Silo. Unit features a 36” wide main drag slat conveyor factory rated @ 450 TPH, dual strand 4” pitch chain, a pneumatic reject system and triple axle portability.
• Terex® Model WMA-P000 Skid Mounted Asphalt Foam Additive System
• Trailmobile Parts Trailer pictured is included.

NOTE: the Generator Trailer and Gen-Set is NOT included.