Cedarapids Parallel Flow Drum Plant
GTB-5416
Make: Cedarapids Size: 8835 Type: Parallel Flow Drum Plant
Cold Feed System:
- (6) Nominal 10’ x 12’ Stationary Bins with Collector Conveyor measuring 30” wide x nominal 96’ long
- 3’ x 8’ single deck Vibrating Screen w/7.5HP motor and support stand.
- Cedarapids 30” wide x 33’ long Portable truss type Virgin Transfer Conveyor w/ Systems Belt Scale and a Gravity Take-Up
Drum:
- Portable Cedarapids Model #8835 Parallel Flow 88” Diameter x 35’ long fully skinned and insulated.
- Slinger belt fed and recycle collar with calibration/divert chute. Dryer is cradle chain driven with 100HP Drive package, left hand discharge from burner end.
- Genco® UFII-100, 100 M.B.T.U. Combination fuel burner currently fired on natural gas with 60HP Blower.
Baghouse:
- Cedarapids model 8800-P Portable Pulsejet style dust collector
- Nominal 44,000 ACFM @ 5:1 air-to-cloth ratio with (560) 6 ¾” dia x 10’ top load bags with venturies
- Main Exhaust fan with a single 150HP motor, top mounted stack, and remote controlled exhaust damper.
- Drag Slat bottom dust removal with a 5HP motor feeds a summing screw equipped with an airlock.
- Inlet fire door/slam damper
- Pulse Control Panel and Main Control Panel included
- Sullair Screw-type Air Compressor and dust blower mounted on the rear of baghouse.
AC System:
- (1) Stansteel Model #11171N 30,000 Gallon – Portable AC tank fully skinned and insulated and coiled. Gooseneck mounted 3” loading/unloading pump, hot oil expansion tank and rear mounted AC pump metering skid.
- (2) CMI 30,000 Gallon 15/15 Split Tank – Stationary skid-mounted, skinned and insulated, and coiled. Both tanks are reported to have been modified to a single compartment tank. (a section of skin and insulation is no longer on one tank)
- Gencor® HYCGO-200 Hot Oil Heater. 2 MBTU Combination fuel with 10 HP Hot Oil Pump included. Currently set up on Natural Gas.
Recycle System:
- Dual Bin 10’ x 12’ Portable Recycle System equipped with 24” wide x 5’ long feeder conveyors with 3 HP AC drives and radial feed gates.
- Fold down bin dividers and fold-up 30” collector conveyor.
- The rear bin is equipped with a multi –port air cannon system.
- 3’ x 5’ single deck vibrating screen with 7-1/2 HP motor and support stand.
- Portable 24” wide x nominal 50’ long truss type Recycle Feed Conveyor w/Systems Belt Scale and a Gravity Take-up.
Silo System:
- Three (3) CMI nominal 150T capacity Hotmix Storage Silos with fully insulated and skinned with an enclosed cone section and safety gates.
- Dual clam gate style discharge gates.
- Top mounted batcher assemblies and mix level indicators.
- Bolt-on support legs
- 36” wide x 32” deep Main Drag Slat Conveyor with dual strand 4” pitch chain roller chain, 31-3/4” x 6” punched angle slats, chrome carbide wear floor and a 75 HP motor.
- Two (2) 30” wide Bintop Transfer Conveyor with a 15 HP Drive and 4” pitch roller chain with punched angle slats.
- 10’ wide x 70’ long steel deck above ground truck scale.
- Portable quad axle single level control house with plug-in cabling
Info Sheet: GTB-5416WS
